120mm Case Fan in 3.5 in Ch Bay

Front Case 3x 5.25" Intake Fan 120mm Arranger v4

thingiverse

Designed to fit my front causa, 3 x 5.25" slots to deem intake 120mm fan. ...Inside information technology is regressive with screws.

3x 5.25 PC Fan Bay

thingiverse

Simple and effective 3x 5.25 12cm Fan Bay for finer PC refrigeration. ...

HDD adaptor for triple 5.25" bay (compatible with 120mm fan bracket)

thingiverse

this is an adapter for that old case with tons of cd 5.25" bay, you can get a very cool hdd with the optional 120mm fan mount

5.25 " bay laurel to 120MM Rooter arranger for cooling hard drives

thingiverse

After printing my HD Adapters... ... https://www.thingiverse.com/thing:3319214 I thought it would beryllium nice to defecate an adapter to use a 5.25" PC bay to black eye on the drives with a 120mm fan... ...Ta DA!

5.25" CD drive Bay 120mm Case Winnow Cover Arranger

thingiverse

removed the logo for a plain look

Computing device case fan arranger - 3x 5.25" bays - 120 mm fan

thingiverse

An arranger for a 120 mm fan in the front of the case, taking three 5.25" cause bays. The fan is held in situ past four M4 (4 mm) screws, the adapter standard M3 (3 millimetre) screws, the same 5.25" drives expend. I was able to hold it in situ with M3 screws...

fan cooler abide 120mm to 5.25"

thingiverse

120mm fan cooler symbolise the Compact disk player sector. ... holes are made in the side with dremel

5.25 drive bay 120mm fan mod

thingiverse

this is a 3 part blueprint, very simplistic in nature but impelling in performance (if I exercise say so myself) information technology uses the 2 5.25 bays typically entirely available in a middle-atx caseful and positions the 120mm devotee at a angle eligible to fit but withal flow air...

5.25" Bay 120mm Rooter cooler

thingiverse

I simply had cardinal 5.25" bays gratis and a spare 120mm fan from an nonmodern power supply then I came up with this design. Running at 7v it pulls quite a lot of zephyr into the grammatical case and is fairly implicit. Screw two vents one to either side of a 120mm fan and expend four...

Retro mount up plate for 120mm data processor fan in 3x 5 inch bay (for a retro computer showcase)

thingiverse

Just a bestrid for an ancient computer case. ...Looks like an senior speaker. If I were to print it once more I would add headway for the fan blades (fan almost grinds connected the grating).

120mm Fan mount for 3x5.25

thingiverse

Non exactly a remix, I recreated the 120mm fan mount bracket for this HDD mount to actually paroxysm and mount inside a standard ATX vitrine 5.25x3 bay.

140mm / 120mm Fan To 5.25" Optical Drive in Bay Adapter V2

thingiverse

A simple way to mount a 140mm operating theater 120mm rooter in 4 x 5.25" Optical Drive Bays.

120mm Fan Mount for 5.25 bay with a insert to add a dust sink in

thingiverse

120 mm Fan mount that fits into 3x 5.25 bay drives in your pc. I placed gauze between the fan setting and the insert to create a junk and bug filter. ... May need some sanding, supported the indents if your calculator cage.

4x 3,5" to 3x 5,25" Arranger

thingiverse

... for my hard drives for my successful NAS. The adapter takes 4 hard drives in 3.5 "format and is well-stacked into 3 free 5.25" drive bays. Adapter consists of 2 parts (left and right). ...Both sides are bolted to the HDDs and then installed in the sheath.

120mm Fan Mount for 5.25" bay (compatible with hdd square bracket)

thingiverse

this is an better version of the 120mm fan mount, this can easily be instaled with few screws

120mm 5.25 inch drive bay buff mount

thingiverse

This is a climb adapter for 120 mm fans, constructed to harmonise 3 x 5.25" drive bays. This is different from past mounts, since this one does non intend to be visible from the outside, hence its limited dimensions. As you can see from the...

ender 5 box for 120mm fan

thingiverse

Boitier pour pouvoir mettre un ventilateur 120mm, il n'y a qu'a visser a la place Diamond State la plaque d'origine, il vous faudra des vis de 3*30mm : https://Fr.aliexpress.com/item/33009371889.html?spm=a2g0s.9042311.0.0.27426c37h2Rmjw Vous pouvez retirer les...

120mm buff to 1.5" tube adapter

thingiverse

I print a lot of parts inside my house and leave a mates windows open for ventilation from the plastic melting vaporisation. Unfortunately, when it gets cold out, I Don't want to open all my windows so I'm construction a fume extraction system. This is a key...

120mm fan mount for 3x5.25" drive bay

thingiverse

Made for the Corsair 500r Microcomputer case, simply it should fit near cases. Printed with a 0,8mm hooter and 0,45mm layer altitude, resulting in a printing time of ~25min. Suffer is needful operating theater else the clips get over spaghetti. ... I've included the mill file...

120mm Fan Continue #5

thingiverse

A cover for a 120mm fan.

Improved 80mm tube adapter for 120mm fan

thingiverse

This adapter makes assertable to extract exhaust fumes from the cabinet of your printing machine using a normal 120mm computer fan.

120mm Fan Adapter for Brocade ICX6450

thingiverse

This is a 120mm fan adapter for a Brocade ICX6450 trade. Information technology's designed for the 24-port replacement, which has two fans (the 48-porthole POE switch might have three fans). My switch already has the internal fans modified to use quieter-than-stock fans, but I...

120mm Fan Adapter for 20A Power Supply

thingiverse

After putting my pressman into an enclosure, the loudest part was the power supply on the outer, so I was wanting to find something i could either change the devotee operating theatre something. ...Looking about, i merged a couple of things to come up with this

5.25" Drive Quest x 4 to 140mm/120mm Fan Duct W/ Optional Square Vent-hole Grill

thingiverse

Fits into four 5.25" drive embayment slots, has mounting holes for 140mm and 120mm Fans. ... Optional square release grill also obtainable, but might ray-make this for better mounting, so I don't recommend printing it, As it WILL fail at some channelis

3x buff for Melzi bord

thingiverse

3 x40 millimetre fan mount for Melzi bord , designed for my tronxy x3

PCIE 120mm Fan Adapter

thingiverse

A simple rooter adapter for a 120mm fan

3.5" hard drive Laurus nobilis 120mm devotee mount up adapter

thingiverse

With this fancypants bracket you can put a 120mm intake fan in your old ATX cases hard drive area. Try to guess of a advisable thought kickoff as this is a elflike silly. Oh yeah and my fan in the pictures was 38 mm thick. ...If you want a slimmer buff you ask...

3.5" RAID HDD mounts for fan 120mm hole pattern

thingiverse

Raid backing for a 120 millimeter PC fan kettle of fish pattern (105 x 105)

Transcriber for Processor fan to 120mm case fan

thingiverse

Elysian by this adapter https://www.thingiverse.com/thing:4138132 just I didn't want to break mine sol I came up with the first version adapter (scene 3), but before impression it I thought I could design another model that used less material...

120mm fan adapter

thingiverse

Adapt your standard size fan with a 120mm lover for your computer.

120mm Case Fan in 3.5 in Ch Bay

Source: https://www.stlfinder.com/3dmodels/120mm-fan-adapter-for-3x-5-25/